Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
Chapter 1 AAA Configuration Commands
1-41
display all the buffered stop-accounting requests generated from
start-time
to
stop-time
.
user-name
user-name
: Displays the buffered stop-accounting requests of a specified
user. Here,
user-name
is a string of up to 184 characters.
Description
Use the
display stop-accounting-buffer
command to display the non-response
stop-accounting requests buffered in the device.
Note:
z
You can choose to display the buffered stop-accounting requests of a specified
RADIUS scheme, session (by session ID), or user (by username). You can also
specify a time range to display those generated within the specified time range. The
displayed information helps you diagnose and resolve RADIUS problems.
z
If the switch gets no response in a specified time period after sending a
stop-accounting request to a RADIUS server, it will buffer the request and transmit
the buffered one until the maximum number of transmission attempts (set by the
retry stop-accounting
command) is reached.
Related commands:
reset stop-accounting-buffer
,
stop-accounting-buffer enable
,
retry stop-accounting
.
Examples
# Display the buffered stop-accounting requests generated from 0:0:0 08/31/2002 to
23:59:59 08/31/2002.
<Sysname> display stop-accounting-buffer time-range 00:00:00-08/31/2002
23:59:59-08/31/2002
Total find 0 record
1.2.9 key
Syntax
key
{
accounting
|
authentication
}
string
undo key
{
accounting
|
authentication
}
View
RADIUS scheme view