Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
Chapter 1 AAA Configuration Commands
1-46
undo primary accounting
View
RADIUS scheme view
Parameters
ip-address
: IP address of the primary accounting server to be used, in dotted decimal
notation.
port-number
: UDP port number of the primary accounting server, ranging from 1 to
65535.
Description
Use the
primary accounting
command to set the IP address and port number of the
primary RADIUS accounting server to be used by the current scheme.
Use the
undo primary accounting
command to restore the default IP address and
port number of the primary RADIUS accounting server, which are 0.0.0.0 and 1813
respectively.
In the system default RADIUS scheme “system”, the default IP address of the primary
accounting server is 127.0.0.1 and the default UDP port number is 1646. In a new
RADIUS scheme, the default IP address of the primary accounting server is 0.0.0.0 and
the default UDP port number is 1813.
Related commands:
key
,
radius scheme
,
state
.
Examples
# Set the IP address and UDP port number of the primary accounting server for
RADIUS scheme radius1 to 10.110.1.2 and 1813 respectively.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1] primary accounting 10.110.1.2 1813
1.2.14 primary authentication
Syntax
primary authentication
ip-address
[
port-number
]
undo primary authentication
View
RADIUS scheme view