Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
Chapter 1 AAA Configuration Commands
1-48
1.2.15 radius client
Syntax
radius client enable
undo radius client
View
System view
Parameters
None
Description
Use the
radius client enable
command to enable RADIUS authentication and
accounting ports.
Use the
undo radius client
command to disable RADIUS authentication and
accounting ports.
By default, RADIUS authentication and accounting ports are enabled.
If you want to use the switch as a RADIUS client, you need to ensure that the ports for
RADIUS authentication and accounting are open. Otherwise, you can disable the ports
to improve security of the switch.
Related commands:
radius scheme
.
Examples
# Disable the RADIUS authentication and accounting ports.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] undo radius client enable
1.2.16 radius nas-ip
Syntax
radius nas-ip ip-address
undo radius nas-ip
View
System view
Parameters
ip-address
: Source IP address to be set, an IP address of this device. This address can
