Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
Chapter 1 AAA Configuration Commands
1-51
View
System view
Parameters
authentication-server-down
: Enables/disables the switch to send trap messages
when a RADIUS authentication server turns down.
accounting-server-down
: Enables/disables the switch to send trap messages when a
RADIUS accounting server turns down.
Description
Use the
radius trap
command to enable the switch to send trap messages when a
RADIUS server turns down.
Use the
undo radius trap
command to disable the switch from sending trap messages
when a RADIUS authentication server or a RADIUS accounting server turns down.
By default, this function is disabled.
This configuration takes effect on all RADIUS scheme.
Note:
The switch considers a RADIUS server as being down if it has tried the configured
maximum number of times to send a message to the RADIUS server but does not
receive any response.
Examples
# Enable the switch to send trap messages when a RADIUS authentication server turns
down.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius trap authentication-server-down
1.2.19 reset radius statistics
Syntax
reset radius statistics
View
User view