Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
Chapter 1 AAA Configuration Commands
1-71
Examples
# Use hello as the shared key for HWTACACS accounting messages in HWTACACS
scheme hwt1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] key accounting hello
1.3.7 nas-ip
Syntax
nas-ip
ip-address
undo nas-ip
View
HWTACACS scheme view
Parameters
ip-address
: Source IP address to be set, an IP address of this device. This address can
neither be the all 0's address nor be a Class D address.
Description
Use the
nas-ip
command to set the source address of outgoing HWTACACS
messages.
Use the
undo nas-ip
command to restore the default setting.
Note that:
z
You can set the source address of HWTACACS messages to avoid messages
returned from server from being unable to reach their destination due to physical
interface trouble. It is recommended to use a Loopback interface address as the
source IP address.
z
You can set only one source IP address by using this command. When you
re-execute this command again, the newly set source IP address will overwrite the
old one.
Related commands:
display hwtacacs
.
Examples
# Set source IP address 10.1.1.1 for outgoing HWTACACS messages in HWTACACS
scheme hwt1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.