Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
Chapter 2 EAD Configuration Commands
2-1
Chapter 2 EAD Configuration Commands
2.1 EAD Configuration Commands
2.1.1 security-policy-server
Syntax
security-policy-server
ip-address
undo security-policy-server
{
ip-address
|
all
}
View
RADIUS scheme view
Parameters
ip-address
: IP address of a security policy server.
all
: IP addresses of all security policy servers.
Description
Use the
security-policy-server
command to set the IP address of a security policy
server.
Use the
undo security-policy-server
command to remove one specified or all security
policy server address settings.
You can configure up to eight security policy server addresses in each RADIUS
scheme. The switch only responds to those session control messages that come from
authentication server or security policy server.
Examples
# Set a security policy server address 192.168.0.1 on the switch.
<Sysname>system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme extended
[Sysname-radius-extended] security-policy-server 192.168.0.1
[Sysname-radius-extended] display current-configuration
…
radius scheme extended
primary authentication 1.1.11.29 1812
secondary authentication 127.0.0.1 1645