Command Manual (For Soliton) – MAC Address Authentication
H3C S3100 Series Ethernet Switches
Chapter 1 MAC Address Authentication
Configuration Commands
1-2
Silent Mac User info:
MAC ADDR From Port Port Index
0016-e0be-e201 Ethernet1/0/2 1(vlan:1)
--- 1 silent mac address(es) found. ---
Ethernet1/0/1 is link-up
MAC address authentication is Enabled
max-auth-num is 256
Guest VLAN is 2
Authenticate success: 1, failed: 0
Current online user number is 1
MAC ADDR Authenticate state AuthIndex
000d-88f8-4e71 MAC_AUTHENTICATOR_SUCCESS 0
……(The following is omitted)
Table 1-1
Description on the fields of the
display mac-authentication
command
Field
Description
Mac address
authentication is Enabled
MAC address authentication is enabled.
Authentication mode
Username type used in the MAC address
authentication:
z
UsernameFixed: Uses the fixed username for
authentication.
z
UsernameAsMacAddress: Uses the MAC address
of a user as the username for authentication.
The default is the MAC address
(UsernameAsMacAddress).
Fixed password
Meaning of this field varies by the username type for
MAC address authentication:
z
If the username type is MAC address, this field
indicates whether to use a fixed password for
authentication. By default, this field is not configured,
which means using the MAC address of a user as
the password for authentication.
z
If the username type is fixed username, this field
indicates whether a fixed password is configured. By
default, this field is not configured, which means the
password is null.
Fixed password
Password used in the fixed mode, which is not
configured by default.
Offline detect period
Offline detect timer, which sets the time interval to
check whether a user goes offline and defaults to 300
seconds.
Quiet period
Quiet timer sets the quiet period. A switch goes through
a quiet period if a user fails to pass the MAC address
authentication. The default value is 60 seconds.
