Command Manual (For Soliton) – ARP
H3C S3100 Series Ethernet Switches
Chapter 1 ARP Configuration Commands
1-14
Examples
# Display the setting of the ARP aging time.
<Sysname> display arp timer aging
Current ARP aging time is 20 minute(s)(default)
The displayed information shows that the ARP aging time is set to 20 minutes.
1.1.17 gratuitous-arp-learning enable
Syntax
gratuitous-arp-learning enable
undo gratuitous-arp-learning enable
View
System view
Parameters
None
Description
Use the
gratuitous-arp-learning enable
command to enable the gratuitous ARP
packet learning function. Then, a switch receiving a gratuitous ARP packet can add the
IP and MAC addresses carried in the packet to its own dynamic ARP table if it finds no
corresponding ARP entry for the ARP packet in the cache.
Use the
undo gratuitous-arp-learning enable
command to disable the gratuitous
ARP packet learning function.
By default, the gratuitous ARP packet learning function is disabled.
Examples
# Enable the gratuitous ARP packet learning function on a switch.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] gratuitous-arp-learning enable
1.1.18 reset arp
Syntax
reset
arp
[
dynamic
|
static
|
interface interface-type interface-number
]
View
User view