Command Manual (For Soliton) – QoS-QoS Profile
H3C S3100 Series Ethernet Switches
Chapter 1 QoS Commands
1-7
weight of queue 1: 8
weight of queue 2: 4
weight of queue 3: 1
Table 1-2
Description on the fields of the
display qos-interface all
command
Field
Description
line-rate
Port with rate limiting configured
Inbound
Inbound direction. That is, rate limiting is
performed to the inbound packets
1024 Kbps
The target rate
Queue scheduling mode
Queue scheduling algorithm adopted
weight of queue 0
Scheduling weight for queue 0
1.1.7 display qos-interface line-rate
Syntax
display qos-interface
{
interface-type interface-number
|
unit-id
}
line-rate
View
Any view
Parameter
interface-type interface-number
: Specifies the type and number of a port, for which the
line rate configuration information is to be displayed.
unit-id
: Unit ID, which is fixed to 1. With this argument specified, the rate limiting
configuration of all the ports on the device is displayed.
Description
Use the
display qos-interface line-rate
command to display the rate limiting
configuration of a port or all the ports on the device.
Related command:
line-rate
.
Example
# Display the rate limiting configuration of Ethernet 1/0/1.
<Sysname> display qos-interface Ethernet 1/0/1 line-rate
Ethernet1/0/1: line-rate
Inbound: 128 Kbps
Refer to
Table 1-2
for the description on the output fields.
