Command Manual (For Soliton) – QoS-QoS Profile
H3C S3100 Series Ethernet Switches
Chapter 1 QoS Commands
1-9
1.1.9 display qos-interface traffic-limit
Syntax
display qos-interface
{
interface-type interface-number
|
unit-id
}
traffic-limit
View
Any view
Parameter
interface-type interface-number
: Specifies the type and number of a port, for which the
traffic policing configuration information is to be displayed.
unit-id
: Unit ID, which is fixed to 1. With this argument specified, the traffic policing
configuration of all the ports on the device is displayed.
Description
Use the
display qos-interface traffic-limit
command to display the traffic policing
configuration of a port or all the ports on the device. This command also displays the
traffic policing statistics.
Related command:
traffic-limit
.
Example
# Display the traffic policing configuration and the corresponding statistics on Ethernet
1/0/1.
<Sysname> display qos-interface Ethernet 1/0/1 traffic-limit
Ethernet1/0/1: traffic-limit
Inbound:
Matches: Acl 2001 rule 0 running
Target rate: 128 Kbps
Conform action: remark-cos video
Exceed action: drop
meter-statistic running
12 byte outprofile
24 byte inprofile
Refer to
Table 1-1
for the description on the output fields.
1.1.10 display qos-interface traffic-priority
Syntax
display qos-interface
{
interface-type interface-number
|
unit-id
}
traffic-priority
