Command Manual (For Soliton) – Configuration File Management
H3C S3100 Series Ethernet Switches
Chapter 1 Configuration File
Management Commands
1-7
vlan 5 to 69
#
vlan 70
description Vlan 70
#
vlan 71 to 100
#
return
1.1.3 display saved-configuration
Syntax
display
saved-configuration
[
unit
unit-id
] [
by-linenum
]
View
Any view
Parameters
unit
unit-id
: Specifies the unit ID of a switch. It only can be 1.
by-linenum
: Displays configuration information with line numbers.
Description
Use the
display saved-configuration
command to display the initial configuration file
of a switch.
Note that:
z
If the switch starts up without a configuration file, the system will display that no
configuration file exists upon execution of the command.
z
If you have saved configuration after the switch starts up, the command displays
the last saved configuration.
Related commands:
save
,
reset saved-configuration
,
display
current-configuration
.
Examples
# Display the initial configuration file of the current switch.
<Sysname> display saved-configuration
#
sysname Sysname
#
radius scheme system
#
domain system