Command Manual (For Soliton) – QoS-QoS Profile
H3C S3100 Series Ethernet Switches
Chapter 1 QoS Commands
1-10
View
Any view
Parameter
interface-type interface-number
: Specifies the type and number of a port, for which the
priority marking configuration information is to be displayed.
unit-id
: Unit ID, which is fixed to 1. With this argument specified, the priority marking
configuration of all the ports on the device is displayed.
Description
Use the
display qos-interface traffic-priority
command to display the priority marking
configuration of a port or all the ports on the device.
Related command:
traffic-priority
.
Example
# Display the priority marking configuration of Ethernet 1/0/1.
<Sysname> display qos-interface Ethernet 1/0/1 traffic-priority
Ethernet1/0/1: traffic-priority
Inbound:
Matches: Acl 2000 rule 0 running
Priority action: cos controlled-load
Table 1-4
Description on the fields of the
display qos-interface traffic-priority
command
Field
Description
Ethernet1/0/1
Port with priority marking configured
Inbound Packet
direction
Matches
ACL rules for traffic classifying
Priority action
Priority marking action
z
cos indicates that the CoS precedence of packets is marked
z
dscp indicates that the DSCP precedence of packets is
marked
z
local-precedence indicates that the Local precedence of
packets is marked
1.1.11 display qos-interface traffic-redirect
Syntax
display qos-interface
{
interface-type interface-number
|
unit-id
}
traffic-redirect