Command Manual (For Soliton) – QoS-QoS Profile
H3C S3100 Series Ethernet Switches
Chapter 1 QoS Commands
1-30
Description
Use the
reset traffic-limit vlan
command to clear the statistics on packets of a VLAN.
Related command:
traffic-limit vlan
.
Example
# Clear the statistics on packets that match ACL 2000 and are of VLAN 1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] reset traffic-limit vlan 1 inbound ip-group 2000
1.1.28 reset traffic-statistic
Syntax
reset traffic-statistic
inbound
acl-rule
View
System view, Ethernet port view, Port group view
Parameter
inbound
: Specifies to clear the statistics on the inbound packets.
acl-rule
: ACL rules to be applied. This argument can be the combination of multiple
ACLs. For more information about this argument, refer to
Table 1-8
and
Table 1-9
.
Description
Use the
reset traffic-statistics
command to clear the statistics on all the packets
matching specific ACL rules, or the packets that match specific ACL rules and are of a
port group or pass a port.
Related command:
traffic-statistic
.
Example
# Clear the statistics on packets matching ACL 2000 and passing Ethernet 1/0/1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet1/0/1
[Sysname-Ethernet1/0/1] reset traffic-statistic inbound ip-group 2000
1.1.29 reset traffic-statistic vlan
Syntax
reset traffic-statistic
vlan
vlan-id
inbound
acl-rule