Command Manual (For Soliton) – QoS-QoS Profile
H3C S3100 Series Ethernet Switches
Chapter 1 QoS Commands
1-32
The granularity of port rate limit is 64 Kbps. Assume that the value you provide for the
target-rate
argument is in the range N*64 to (N+1)*64 (N is a natural number), it will be
rounded off to (N+1)*64.
burst-bucket burst-bucket-size:
Specifies the maximum burst traffic size (in kilobytes)
allowed. The
burst-bucket-size
argument must a multiple of 8 and ranges from 8 to
1016.
conform con-action
: Sets the actions of the switch on the packets except forwarding
when the packet traffic is within the specified traffic. The
con-action
argument can be:
z
remark-dscp
dscp-value
: Sets the DSCP precedence for the packets. The
dscp-value
argument is in the range of 0 to 63. You can also enter a keyword listed
in
Table 1-13
for this argument.
z
remark-cos
cos-value
: Sets the 802.1p precedence for the packets. The
cos-value
argument is in the range of 0 to 7. You can also enter a keyword listed in
Table 1-14
for this argument.
Table 1-13
DSCP precedence keywords and the corresponding decimal/binary values
Keyword
DSCP value (decimal)
DSCP value (binary)
af11
10 001010
af12
12 001100
af13
14 001110
af21
18 010010
af22
20 010100
af23
22 010110
af31
26 011010
af32
28 011100
af33
30 011110
af41
34 100010
af42
36 100100
af43
38 100110
be
(the default)
0 000000
cs1
8 001000
cs2
16 010000
cs3
24 011000
cs4
32 100000
cs5
40 101000
cs6
48 110000