Command Manual (For Soliton) – QoS-QoS Profile
H3C S3100 Series Ethernet Switches
Chapter 1 QoS Commands
1-33
Keyword
DSCP value (decimal)
DSCP value (binary)
cs7
56 111000
ef
46 101110
Table 1-14
802.1p precedence keywords and the corresponding decimal/binary values
Keyword
802.1p precedence
(decimal)
802.1p precedence
(binary)
best-effort
0 000
background
1 001
Spare
2 010
excellent-effort
3 011
controlled-load
4 100
Video
5 101
Voice
6 110
Network-management
7 111
exceed
exceed-action
: Sets the actions on the part of the packets exceeding the
specified traffic when the packet traffic exceeds the specified traffic. The actions
include:
z
drop
: Drops the packets.
z
forward
: Forwards the packets.
z
remark-dscp
dscp-value
: Resets the DSCP precedence of the packets and
forwards them at the same time. The DSCP value is in the range of 0 to 63. You
can also enter a keyword listed in
Table 1-13
for this argument.
meter-statistic
: Performs the statistics function on traffic policing. It can meter the
bytes of the packets within the limited rate and the bytes of the packets beyond the
limited rate. Note that, for the same ACL rule, the
meter statistic
keyword in this
command and the traffic accounting function are mutually exclusive in system view,
Ethernet port view, or port group view.
Description
Use the
traffic-limit
command to perform traffic policing for all the packets matching
specific ACL rules, or for packets that match specific ACL rules and are of a port group
or pass a port.
Use the
undo traffic-limit
command to cancel the configuration.
