Command Manual (For Soliton) – Configuration File Management
H3C S3100 Series Ethernet Switches
Chapter 1 Configuration File
Management Commands
1-11
View
Any view
Parameters
by-linenum
: Displays configuration information with line numbers.
Description
Use the
display this
command to display the current configuration performed in the
current view. To verify the configuration performed in a view, you can use this command
to display the parameters that are valid in the current view.
Note that:
z
Effective parameters that are the same as the default are not displayed.
z
The configured parameter whose corresponding function does not take effect is
not displayed.
z
Execution of this command in any user interface view or VLAN view displays the
valid configuration parameters in all user interfaces or VLANs.
Related commands:
save
,
reset saved-configuration
,
display saved-configuration
,
display current-configuration
.
Examples
# Display the configuration parameters that take effect in all user interface views.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] display this
#
user-interface aux 0
user-interface vty 0 4
authentication-mode none
user privilege level 3
#
return
1.1.6 reset saved-configuration
Syntax
reset
saved-configuration
[
backup
|
main
]
View
User view
