Command Manual (For Soliton) – Configuration File Management
H3C S3100 Series Ethernet Switches
Chapter 1 Configuration File
Management Commands
1-15
unit unit-id
: Specifies a switch by its unit ID. It only can be 1.
Description
Use the
startup
saved-configuration
command to specify a configuration file to be the
main configuration file or the backup configuration file to be used for the next startup of
the switch.
Use the
undo startup
saved-configuration
command to specify a switch to use null
configuration when it restarts.
Note that: If you execute the
startup
saved-configuration
command with neither the
backup
nor the
main
keyword specified, the configuration file identified by the
cfgfile
argument is specified as the main configuration file to be used for the next startup of the
switch.
Caution:
The configuration file must use
.cfg
as its extension name and the startup configuration
file must be saved at the root directory in the Flash of the switch.
Related commands:
display startup
.
Examples
# Configure the configuration file named
config.cfg
as the main configuration file to be
used for the next startup of the current switch.
<Sysname> startup saved-configuration config.cfg main
Please wait......Done!