Command Manual (For Soliton) – Stack-Cluster
H3C S3100 Series Ethernet Switches
Chapter 2 HGMP V2 Configuration
Commands
2-29
Administrator device mac address:000f-e20f-3901
Administrator status:Up
Table 2-5
Description on the fields of the
display cluster
command
Field
Description
Cluster name
Name of the cluster, which can be configured
through the
build
command
Role
Role of this switch
Management-vlan
Number of the management VLAN, which can
be configured through the
management-vlan
command
Member number
Member number of this switch
Handshake timer
Interval to send handshake packets, which
can be configured through the
timer
command
Handshake hold-time
Holdtime of the neighbor status information,
which can be configured through the
holdtime
command
Administrator device mac address
MAC address of the management device
Administrator status
Status of the management device
2.3.12 display cluster candidates
Syntax
display cluster candidates
[
mac-address H-H-H
|
verbose
]
View
Any view
Parameters
mac-address H-H-H
: Specifies a candidate device by its MAC address.
H-H-H
represents the MAC address.
verbose
: Displays detailed information about candidate devices.
Description
Use the
display cluster candidates
command to display information about one
specified or all candidate devices of a cluster.
You can only use this command on a management device.
Note that, after a cluster is set up on an S3600 series switch, the switch will collect the
topology information of the network at the topology collection interval you set and