Command Manual (For Soliton) – Stack-Cluster
H3C S3100 Series Ethernet Switches
Chapter 2 HGMP V2 Configuration
Commands
2-30
automatically add the candidate devices it discovers into the cluster. As a result, if the
topology collection interval is too short (the default interval is 1 minute), the switches
acting as candidate devices will not keep in candidate state for a long time – they will
change to member devices within a short time. If you do not want the candidate
switches to be automatically added into the cluster, you can set the topology collection
interval to zero (by using the
ntdp timer
command), which specifies not to perform
topology collection periodically.
Examples
# Display information about all candidate devices.
<aaa_0.Sysname-cluster> display cluster candidates
MAC HOP IP PLATFORM
3900-0000-3334 2 16.1.1.11/24 S3100
000f-e20f-3190 1 16.1.1.1/24 S3100
Table 2-6
Description on the fields of the
display cluster candidates
command
Field
Description
MAC
MAC address of the candidate device
Hop
Hops from the management device to the candidate device
IP
IP address of the candidate device
Platform
Platform of the candidate device
# Display information about a specified candidate device.
<aaa_0.Sysname-cluster> display cluster candidates mac-address
000f-e20f-3190
Hostname : 3100-3
MAC : 000f-e20f-3190
Hop : 1
Platform : S3100
IP : 16.1.1.1/24
# Display detailed information about all candidate devices.
<aaa_0.Sysname-cluster> display cluster candidates verbose
Hostname : H3C
MAC : 3100-0000-3334
Hop : 2
Platform : S3100
IP : 16.1.1.11/24
Hostname : 3100-3
MAC : 000f-e20f-3190
