Command Manual (For Soliton) – Stack-Cluster
H3C S3100 Series Ethernet Switches
Chapter 2 HGMP V2 Configuration
Commands
2-46
Note:
You can only use this command on the cluster administrative device.
If the device to be added to the blacklist is a member of the cluster, the execution of the
black-list add-mac
command will remove the device from the cluster and then add it to
the cluster blacklist. In this case, the
black-list add-mac
command is equivalent to the
delete-member member-id
to-black-list
command.
Examples
# Add the device with the MAC address 0010-3500-e001 to the blacklist.
<aaa_0.Sysname> system-view
Enter system view, return to user view with Ctrl+Z.
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] black-list add-mac 0010-3500-e001
# Delete all addresses in the current cluster blacklist.
[aaa_0.Sysname-cluster] black-list delete-mac all
2.4.2 display cluster base-members
Syntax
display cluster base-members
View
Any view
Parameters
None
Description
Use the
display cluster base-members
command to display the information about all
the devices in the base cluster topology, such as member number, name, MAC address,
and the current status of each device in a cluster.
Examples
# Display the information about all the devices in the base cluster topology.
<aaa_0.Sysname> display cluster base-members
SN Device MAC Adress Status
0 aaa_0.Sysname 000f-e200-30a0 UP
1 aaa_1.S3100 000f-e200-86e4 UP