Command Manual (For Soliton) – Stack-Cluster
H3C S3100 Series Ethernet Switches
Chapter 2 HGMP V2 Configuration
Commands
2-52
Table 2-12
Description on the fields of the
display ntdp single-device
command
Field
Description
Hostname
System name of a device
MAC
MAC address of the device
Hop
Number of hops from the device to the topology-collecting device
Platform
Platform information of the device
IP
IP address and mask length of the management VLAN interface of
the device
Version Version
information
Cluster
Role the device plays in the cluster
Peer MAC
MAC address of the peer device
Peer Port ID
Name of the port on the peer device connecting to the local device
Native Port ID Name of the port on the local device connecting to the peer device
Speed
Rate of the local port connecting to the peer device
Duplex
Duplex mode of the local port connecting to the peer device
2.4.7 topology accept
Syntax
topology accept
{
all
[
save-to local-flash
] |
mac-address mac-address
|
member-id member-id | administrator
}
View
Cluster view
Parameters
all
: Accepts the current cluster topology as the standard topology.
save-to
: Saves the standard topology of the current cluster to the local Flash or the
cluster FTP server.
local-flash
: Saves the standard topology of the current cluster to the local Flash.
mac-address
mac-address
: Accepts adding the device with the specified MAC
address to the standard topology of the cluster.
member-id
member-id
: Accepts adding the device with the specified member ID to the
standard topology of the cluster.
administrator:
Accepts adding the administrative device to the standard topology of
the cluster.