Command Manual (For Soliton) – SNMP-RMON
H3C S3100 Series Ethernet Switches
Chapter 1 SNMP Configuration Commands
1-6
View status:active
View name:ViewDefault
MIB Subtree:snmpModules.18
Subtree mask:
Storage-type: nonVolatile
View Type:excluded
View status:active
The above output information indicates that MIB view
ViewDefault
includes all MIB
objects under the ISO MIB subtree except snmpUsmMIB, snmpVacmMIB and
snmpModules.18.
1.1.5 display snmp-agent statistics
Syntax
display snmp-agent statistics
View
Any view
Parameters
None
Description
Use the
display snmp-agent statistics
command to display the statistics on SNMP
packets.
The statistics are collected from the time when the switch is started, and the statistics
will not be cleared if the SNMP is restarted.
If you execute the command when SNMP agent is not started, the device prompts
“SNMP Agent disabled”.
Examples
# Display the statistics on SNMP packets.
<Sysname> display snmp-agent statistics
1276 Messages delivered to the SNMP entity
0 Messages which were for an unsupported version
0 Messages which used a SNMP community name not known
0 Messages which represented an illegal operation for the community supplied
0 ASN.1 or BER errors in the process of decoding
1291 Messages passed from the SNMP entity
0 SNMP PDUs which had badValue error-status