Command Manual (For Soliton) – VLAN
H3C S3100 Series Ethernet Switches
Chapter 1 VLAN Configuration Commands
1-4
View
Any view
Parameters
vlan-id1
: Specifies the ID of a VLAN of which information is to be displayed, in the range
of 1 to 4094.
to vlan-id2
: In conjunction with
vlan-id1
, define a VLAN range to display information
about all existing VLANs in the range. The
vlan-id2
argument takes a value in the range
of 1 to 4094, and must not be less than that of
vlan-id1
.
all
: Displays information about all the VLANs.
dynamic
: Displays the number of dynamic VLANs and the ID of each dynamic VLAN.
Dynamic VLANs refer to VLANs that are generated through GVRP or those distributed
by a RADIUS server.
static
: Displays the number of static VLANs and the ID of each static VLAN. Static
VLANs refer to VLANs manually created.
Description
Use the
display vlan
command to display information about VLANs. The output shows
the ID, type, VLAN interface state and member ports of a VLAN.
If no keyword or argument is specified, the command displays the number of existing
VLANs in the system and the ID of each VLAN.
Related commands:
vlan
.
Examples
# Display information about VLAN 1.
<Sysname> display vlan 1
VLAN ID: 1
VLAN Type: static
Route Interface: configured
IP Address: 192.168.0.39
Subnet Mask: 255.255.255.0
Description: VLAN 0001
Name: VLAN 0001
Tagged Ports:
Ethernet1/0/1
Untagged Ports:
Ethernet1/0/2