Command Manual (For Soliton) – SNMP-RMON
H3C S3100 Series Ethernet Switches
Chapter 1 SNMP Configuration Commands
1-13
System View: return to User View with Ctrl+Z.
[Sysname] snmp-agent trap enable
[Sysname] snmp-agent target-host trap address udp-domain 10.1.1.1 params
securityname public
[Sysname] interface Ethernet1/0/1
[Sysname-Ethernet1/0/1] enable snmp trap updown
1.1.10 snmp-agent
Syntax
snmp-agent
undo snmp-agent
View
System view
Parameters
None
Description
Use the
snmp-agent
command to enable the SNMP agent.
Use the
undo snmp-agent
command to disable the SNMP agent.
Execution of the
snmp-agent
command or any of the commands used to configure the
SNMP agent, you can start the SNMP agent.
By default, the SNMP agent is disabled.
Examples
# Start the SNMP agent.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] snmp-agent