Command Manual (For Soliton) – SNMP-RMON
H3C S3100 Series Ethernet Switches
Chapter 1 SNMP Configuration Commands
1-15
Related commands:
snmp
-
agent usm
-
user
v3
.
Note:
SNMP agent must be enabled for you to encrypt a plain-text password.
Examples
# Use the local engine ID and the md5 algorithm to encrypt plain-text password
aaaa
.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] snmp-agent calculate-password aaaa mode md5 local-engineid
The result of the password is: B02A2E48346E2CBFFCE809C99CF1F6C
1.1.12 snmp-agent community
Syntax
snmp
-
agent community
{
read
|
write
}
community
-
name
[ [
acl
acl-number
]
[
mib-view
view-name
] ]*
undo snmp
-
agent community
community
-
name
View
System view
Parameters
read
: Specifies that the community to be created has read-only permission to MIB
objects. Communities of this type can only query MIBs for device information.
write
: Specifies that the community to be created has read-write permission to MIB
objects. Communities of this type are capable of configuring devices.
community-name
: Name of the community to be created, a string of 1 to 32 characters.
acl-number
: ID of the ACL to be applied to the community, in the range 2000 to 2999.
Using basic ACL can restrict the source addresses of SNMP messages, namely,
permitting or refusing the SNMP messages with specific source addresses, thus
restricting access between the NMS and the agent.
view-name
: MIB view name, a string of 1 to 32 characters.
Description
Use the
snmp
-
agent community
command to create an SNMP community. SNMPv1
and SNMPv2c use community name to restrict access rights. You can use this