Command Manual (For Soliton) – SNMP-RMON
H3C S3100 Series Ethernet Switches
Chapter 1 SNMP Configuration Commands
1-22
System View: return to User View with Ctrl+Z.
[Sysname]snmp-agent community read rip2read mib-view rip2
[Sysname]snmp-agent community write rip2write mib-view rip2
# Create an SNMP MIB view with the name of
view-a
, MIB subtree of 1.3.6.1.5.4.3.4
and subtree mask of FE. MIB nodes with the OID of
1.3.6.1.5.4.3.x
are included in this
view, with
x
indicating any integer number.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] snmp-agent mib-view included view-a 1.3.6.1.5.4.3.4 mask FE
1.1.17 snmp-agent packet max-size
Syntax
snmp-agent packet max-size
byte-count
undo snmp-agent
packet max-size
View
System view
Parameters
byte-count
: Maximum SNMP packet size (in bytes) to be set, ranging from 484 to
17,940.
Description
Use the
snmp-agent packet max-size
command to set the maximum SNMP packet
size allowed by an agent.
Use
undo snmp-agent packet max-size
command to restore the default maximum
SNMP packet size.
The configuration of the maximum SNMP packet size is to prevent giant packets being
discarded due to existence of devices not supporting fragmentation on a routing path.
Typically, the maximum size of a packet can keep the default value of 1500 bytes.
By default, the maximum SNMP packet size allowed by an agent is 1,500 bytes.
Examples
# Set the maximum SNMP packet size allowed by the agent to 1,042 bytes.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] snmp-agent packet max-size 1042