Command Manual (For Soliton) – SNMP-RMON
H3C S3100 Series Ethernet Switches
Chapter 2 RMON Configuration Commands
2-3
z
The action triggered by the event (log or alarm messages)
z
The time (in seconds) when the latest event is triggered (in terms of the time
elapsed since the system is started/initialized).
Related commands:
rmon event
.
Examples
# Display the configuration of all the RMON event entries.
<Sysname> display rmon event
Event table 1 owned by user1 is VALID.
Description: null.
Will cause log-trap when triggered, last triggered at 0days 00h:02m:27s.
Table 2-2 display rmon event
command output description
Field
Description
Event table
Index of an entry in the RMON event table
VALID
The status of the entry identified by the index
is valid.
Description RMON
event
description
Will cause log-trap when triggered
The event triggers logging and an alarm trap.
last triggered at
Time when the latest event is triggered
2.1.3 display rmon eventlog
Syntax
display rmon eventlog
[
event-entry
]
View
Any view
Parameters
event
-
entry
: RMON event entry index, in the range 1 to 65,535. If you do not specify the
event-entry
argument, the logs of all the RMON events are displayed.
Description
Use the
display rmon eventlog
command to display the log of an RMON event.
On creating an RMON event, you can configure to record the event information into the
logbuffer when an event is triggered, thus facilitating displaying of the information. The
recorded information includes:
z
RMON event entry Index
