Command Manual (For Soliton) – SNMP-RMON
H3C S3100 Series Ethernet Switches
Chapter 2 RMON Configuration Commands
2-4
z
Current RMON event entry status
z
The time (in seconds) when an event log is generated (in terms of the time elapsed
since the system is started or initialized)
z
RMON event description.
Examples
# Display the log generated by the event entry numbered 1.
<Sysname> display rmon eventlog 1
Event table 1 owned by user1 is VALID.
Generates eventLog 1.1 at 0days 00h:01m:39s.
Description: The 1.3.6.1.2.1.16.1.1.1.4.1 defined in alarm table 1,
less than(or =) 100 with alarm value 0. Alarm sample type is absolute.
Generates eventLog 1.2 at 0days 00h:02m:27s.
Description: The alarm formula defined in private alarm table 1,
less than(or =) 100 with alarm value 0. Alarm sample type is absolute.
Table 2-3 display rmon eventlog
command output description
Field
Description
Event table
Index of an entry in the RMON event table
VALID
The status of the entry identified by the index is valid.
Generates eventLog 1.1 at
0days 00h:02m:27s
Time when the event is triggered. The event can be
triggered for multiple times. 1.1 indicates the time
when event 1 is first triggered.
Description Description
of the RMON event log
The above output indicates that two logs are generated due to event 1:
z
Log 1.1 is generated from alarm entry 1, because the sampled value (0) of the
alarm entry is lower than the falling threshold (100). The sampling type is
absolute
.
z
Log 1.1 is generated from prialarm entry 1, because the sampled value (0) of the
prialarm entry is lower than the falling threshold (100). The sampling type is
absolute
.
2.1.4 display rmon history
Syntax
display rmon history
[
interface-type interface-number | unit
unit-number
]
View
Any view
