Command Manual (For Soliton) – NTP
H3C S3100 Series Ethernet Switches
Chapter 1 NTP Configuration Commands
1-4
Table 1-2
Description on the fields of the
display ntp-service status
command
Field
Description
Clock status
Status of the local clock:
z
Synchronized
z
Unsynchronized
Clock stratum
Stratum of the local clock
Reference clock ID
Address of the remote server or ID of the reference clock
after the local clock is synchronized to a remote NTP
server or a reference clock
Nominal frequency
Nominal frequency of the local hardware clock, in Hz.
Actual frequency
Actual frequency of the local hardware clock, in Hz.
Clock precision
Precision of the local hardware clock
Clock offset
Offset of the local clock relative to the reference clock, in
milliseconds.
Root delay
Roundtrip delay between the local clock and the primary
reference clock source, in milliseconds.
Root dispersion
Maximum dispersion of the local clock relative to the
primary reference clock, in milliseconds.
Peer dispersion
Maximum dispersion of the remote NTP server, in
milliseconds.
Reference time
Reference timestamp
1.1.3 display ntp-service trace
Syntax
display ntp-service trace
View
Any view
Parameter
None
Description
Use the
display ntp-service trace
command to display the brief information of each
NTP time server along the time synchronization chain from the local switch to the
reference clock source.
