Command Manual (For Soliton) – File System Management
H3C S3100 Series Ethernet Switches
Chapter 1 File System Management
Configuration Commands
1-21
undo startup bootrom-access enable
View
User view
Parameter
None
Description
Use the
startup bootrom-access enable
command to specify a switch to prompt
users to use customized password to enter the BOOT menu.
Use the
undo startup bootrom-access enable
command to disable the above
function.
By default, users have to use customized passwords to enter the BOOT menu.
You can use the
display startup
command in the
Configuration File Management
part
of the manual to view the execution results of these two commands.
Example
# Specify to prompt users to use customized passwords to enter the BOOT menu.
<Sysname> startup bootrom-access enable
<Sysname> display startup
UNIT 1:
Current Startup saved-configuration file: flash:/config.cfg
Next main startup saved-configuration file: flash:/config.cfg
Next backup startup saved-configuration file: NULL
Bootrom-access enable state: enabled