Command Manual (For Soliton) – FTP-SFTP-TFTP
H3C S3100 Series Ethernet Switches
Chapter 1 FTP and SFTP Configuration
Commands
1-20
View
FTP client view
Parameters
protocol
-
command
: FTP protocol command.
Description
Use the
remotehelp
command to display the help information about an FTP protocol
command.
This command works only when the FTP server provides the help information about
FTP protocol commands.
Caution:
z
This command is always valid when an H3C series Ethernet switch operates as the
FTP server.
z
If you use other FTP server software, refer to related instructions to know whether
the FTP server provides help information about FTP protocol commands.
Examples
# Display the syntax of the
user
command.
[ftp] remotehelp user
214 Syntax: USER <sp> <username>
1.2.21 rename
Syntax
rename
remote
-
source remote
-
dest
View
FTP client view
Parameters
remote
-
source
: Name of a file on a remote host.
remote
-
dest
: Destination file name.
Description
Use the
rename
command to rename a file on a remote FTP server.
