Command Manual (For Soliton) – FTP-SFTP-TFTP
H3C S3100 Series Ethernet Switches
Chapter 2 TFTP Configuration Commands
2-1
Chapter 2 TFTP Configuration Commands
2.1 TFTP Configuration Commands
Note:
When accessing a TFTP server configured with an IPv6 address, use the
tftp ipv6
command. For details, refer to the
IPv6 Management
part in this manual.
2.1.1 tftp { ascii | binary }
Syntax
tftp
{
ascii
|
binary
}
View
System view
Parameters
ascii
: Transfers data in ASCII mode, which is used for transferring text files.
binary
: Transfers data in binary mode, which is used for transferring program files.
Description
Use the
tftp
{
ascii
|
binary
} command to set the TFTP data transfer mode.
By default, the binary mode is adopted.
Examples
# Specify to adopt the ASCII mode.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] tftp ascii
TFTP transfer mode changed to ASCII.
2.1.2 tftp get
Syntax
tftp tftp-server get source-file
[
dest-file
]
