Command Manual (For Soliton) – Information Center
H3C S3100 Series Ethernet Switches
Chapter 1 Information Center Configuration
Commands
1-2
Parameter
unit-id
: Unit ID of the device, the value can only be 1.
Description
Use the
display info-center
command to display the operation status of information
center, the configuration of information channels, the format of time stamp.
Related command:
info
-
center enable
,
info
-
center loghost
,
info
-
center logbuffer
,
info
-
center console channel,
info
-
center monitor channel
,
info-center trapbuffer
,
info-center snmp channel
,
info-center timestamp
Example
# Display the operation status of information center, the configuration of information
channels, the format of time stamp of the current system.
<Sysname> display info-center
Information Center: enabled
Log host:
the interface name of the source address : Vlan-interface1
192.168.0.2, channel number : 2, channel name : loghost
language : english, host facility local : 7
Console:
channel number : 0, channel name : console
Monitor:
channel number : 1, channel name : monitor
SNMP Agent:
channel number : 5, channel name : snmpagent
Log buffer:
enabled,max buffer size : 1024, current buffer size : 512,
current messages : 512, channel number : 4, channel name : logbuffer
dropped messages : 0, overwritten messages : 586
Trap buffer:
enabled,max buffer size : 1024, current buffer size : 256,
current messages : 5, channel number : 3, channel name : trapbuffer
dropped messages : 0, overwritten messages : 0
Information timestamp setting:
log - date, trap - date, debug - boot