Command Manual (For Soliton) – Information Center
H3C S3100 Series Ethernet Switches
Chapter 1 Information Center Configuration
Commands
1-13
undo info-center snmp channel
View
System view
Parameter
channel
-
number
: Channel number, ranging from 0 to 9, corresponding to the 10
channels of the system.
channel
-
name
: Channel name, by default, the name of channel 0 to channel 9 is (in turn)
console
,
monitor
,
loghost
,
trapbuffer
,
logbuffer
,
snmpagent
,
channel6
,
channel7
,
channel8
,
channel9
.
Description
Use the
info-center snmp channel
command to set the channel through which
information is output to the SNMP agent.
By default, output of system information to the SNMP NMS is enabled with a default
channel name of snmpagent and a default channel number of 5.
Related command:
snmp-agent
,
display info-center
.
Example
# Set the switch to output information to the SNMP agent through channel 6.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] info-center snmp channel 6
1.1.14 info-center source
Syntax
info-center source
{
modu
-
name
|
default
}
channel
{
channel
-
number |
channel
-
name
} [ {
log
|
trap
|
debug
} {
level
severity
|
state
state
} ]*
undo info-center source
{
modu
-
name
|
default
}
channel
{
channel
-
number |
channel
-
name
}
View
System view
Parameter
modu
-
name
: Module name.
default
: Defaults the settings of all modules.
channel
-
number
: Number of information channel to be used.