Command Manual (For Soliton) – CLI
H3C S3100 Series Ethernet Switches
Chapter 1 CLI Configuration Commands
1-2
CLI view
Description
mst-region
MST region view
mtlk-group
Monitor link group view
null
NULL interface view
peer-key-code
Public key editing view
peer-public-key Public
key
view
poe-profile
PoE profile view
qos-profile
QoS profile view
radius-template
RADIUS scheme view
shell User
view
smlk-group
Smart link group view
system System
view
user-interface
User interface view
vlan VLAN
view
vlan-interface
VLAN interface view
command
: Command for which the level is to be set.
Description
Use the
command-privilege level
command to set the level of a specified command in
a specified view.
Use the
undo command-privilege
view
command to restore the default.
Commands fall into four levels: visit (level 0), monitor (level 1), system (level 2), and
manage (level 3). The administrator can change the level of a command as required.
For example, the administrator can change a command from a higher level to a lower
level so that the lower level users can use the command.
The default levels of commands are described in the following table:
Table 1-2
Default levels of commands
Level
Name
Command
0 Visit
level
Commands used to diagnose network, such as
ping
,
tracert
, and
telnet
commands.
1 Monitor
level
Commands used to maintain the system and diagnose
service fault, such as
debugging
,
terminal
and
reset
commands.
2 System
level
All configuration commands except for those at the
manage level.
