Command Manual (For Soliton) – System Maintenance and Debugging
H3C S3100 Series Ethernet Switches
Chapter 1 Basic System
Configuration and Debugging
Commands
1-4
Summer-Time : abc1 one-off 06:00:00 08/01/2005 06:00:00 09/01/2005 01:00:00
1.1.4 quit
Syntax
quit
View
Any view
Parameter
None
Description
Use the
quit
command to return from current view to a lower level view.
The following lists the three levels of views available on a switch (from lower level to
higher level):
z
User view
z
System view
z
VLAN view, Ethernet port view, and so on
If the current view is user view, this command is used to quit the system.
Related command:
return
,
system-view
.
Example
# Return from system view to user view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] quit
<Sysname>
# Return to system view from Ethernet port view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] quit
[Sysname]
1.1.5 return
Syntax
return
