Command Manual (For Soliton) – System Maintenance and Debugging
H3C S3100 Series Ethernet Switches
Chapter 1 Basic System
Configuration and Debugging
Commands
1-9
8M bytes Flash Memory
Config Register points to FLASH
Hardware Version is REV.A
Bootrom Version is 506
CPLD Version is 001
[Subslot 0] 24FE Hardware Version is REV.A
[Subslot 1] 1GE Hardware Version is REV.A
[Subslot 2] 1GE Hardware Version is REV.A
1.3 System Debugging Commands
1.3.1 debugging
Syntax
debugging
module-name
[
debugging
-
option
]
undo debugging
{
all
|
module-name
[
debugging
-
option
] }
View
User view
Parameter
module-name
: Module name.
debugging
-
option
: Debugging option.
all
: Specifies to disable all debugging.
Description
Use the
debugging
command to enable system debugging.
Use the
undo debugging
command to disable system debugging.
By default, all debugging is disabled for the system.
Note that:
z
Enabled debugging will generate a great deal of debugging information and thus
will affect the efficiency of the system. Therefore, it is recommended not to enable
debugging for multiple functions at the same time. To disable all debugging at a
time, you can use the
undo debugging all
command.
z
The specific debugging information can be displayed on a terminal only after you
have configured the
debugging
,
terminal debugging
, and
terminal monitor
commands.
z
To display the enabled debugging types, use the
display debugging
command.