Command Manual (For Soliton) – System Maintenance and Debugging
H3C S3100 Series Ethernet Switches
Chapter 3 Device Management
Commands
3-10
Examples
# Display the alarm information of the transceiver on interface GigabitEthernet 1/1/2.
<Sysname> display transceiver alarm interface gigabitethernet 1/1/2
GigabitEthernet1/1/2 transceiver current alarm information:
TX fault
Table 3-6
Description on the fields of display transceiver alarm interface
Field
Description
transceiver current alarm information
Current alarm information of the
transceiver
TX fault
TX fault
3.1.10 display transceiver diagnosis interface
Syntax
display transceiver diagnosis interface
[
interface-type
interface-number
]
View
Any view
Parameters
interface-type interface-number:
Interface type and interface number.
Description
Use the
display transceiver diagnosis interface
command to display the currently
measured value of digital diagnosis parameters of a single or all anti-spoofing
transceivers customized by H3C.
Examples
# Display the currently measured value of digital diagnosis parameters of the
anti-spoofing pluggable optical transceiver customized by H3C on interface
GigabitEthernet 1/2/2.
<Sysname> display transceiver diagnosis interface gigabitethernet 1/2/2
GigabitEthernet1/2/2 transceiver diagnostic information:
Current diagnostic parameters:
Temp(°C) Voltage(V) Bias(mA) RX power(dBM) TX power(dBM)
35 3.26 6.18 -35.64 -5.17