Command Manual (For Soliton) – VLAN-VPN
H3C S3100 Series Ethernet Switches
Chapter 3 VLAN Mapping Configuration Commands
3-1
Chapter 3 VLAN Mapping Configuration
Commands
3.1 VLAN Mapping Configuration Commands
3.1.1 vlan-mapping
Syntax
vlan-mapping vlan old-vlan-id remark new-vlan-id
undo vlan-mapping vlan old-vlan-id
View
System view, Ethernet port view
Parameter
vlan
old-vlan-id
: Specifies the source VLAN ID for VLAN mapping. The
old-vlan-id
argument is in the range of 1 to 4094.
remark new-vlan-id
: Specifies the target VLAN ID for VLAN mapping. The
new-vlan-id
argument is in the range of 1 to 4094.
Description
Use the
vlan
-
mapping
command in system view to define a global VLAN mapping rule.
A VLAN mapping rule maps the VLAN tag of a specific VLAN carried in packets to
another one.
Use the
vlan-mapping
command in Ethernet port view to define a VLAN mapping rule
for the current port and enable the VLAN mapping function for the port.
Use the
undo vlan-mapping
command in system view to invalidate a VLAN mapping
rule.
Use the
undo vlan-mapping
command in Ethernet port view to invalidate a VLAN
mapping rule and disable the VLAN mapping function on the current port.