Command Manual (For Soliton) – VLAN-VPN
H3C S3100 Series Ethernet Switches
Chapter 4 BPDU Tunnel Configuration Commands
4-1
Chapter 4 BPDU Tunnel Configuration Commands
4.1 BPDU Tunnel Configuration Commands
4.1.1 bpdu-tunnel
Syntax
bpdu-tunnel protocol-type
undo bpdu-tunnel
{
protocol-type
|
all
}
View
Ethernet port view
Parameters
protocol-type
: Protocol type, packets of which will be transmitted through a BPDU
tunnel, This argument can be a keyword listed in
Table 4-1
.
Table 4-1
Description on the
protocol-name
argument
Value
Description
cdp
Enable/Disable BPDU tunnel for CISCO discovery protocol (CDP).
hgmp
Enable/Disable BPDU tunnel for Huawei group management protocol
(HGMP) related protocols, including neighbor discovery protocol (NDP),
neighbor topology discovery protocol, cluster member remote control
(MRC), and Huawei authentication bypass protocol (HABP).
lacp
Enable/Disable BPDU tunnel for link aggregation control protocol (LACP).
pagp
Enable/Disable BPDU tunnel for port aggregation protocol (PAGP).
pvst
Enable/Disable BPDU tunnel for per-VLAN spanning tree (PVST).
stp
Enable/Disable BPDU tunnel for spanning tree protocol (STP).
vtp
Enable/Disable BPDU tunnel for VLAN trunk protocol (VTP).
udld
Enable/Disable BPDU tunnel for uni-directional link direction (UDLD).
all
: Disables BPDU tunnel for all protocol packets.
Description
Use the
bpdu-tunnel
command to enable BPDU tunnel on a port, so that packets of the
specified protocol will be transparently transmitted through the BPDU tunnel on the
port.