Quick Start
H3C S3610 Series Ethernet Switches
Chapter 3 Installing the Switch
3-16
(1)
(4)
(1)
(2)
(4)
(3)
(1)
(4)
(1)
(2)
(4)
(3)
(1): Power input on the switch
(2): Grounding screw on the switch
(3): ground wire
(4): Grounding strip
Figure 3-14
Grounding the switch through a grounding strip
z
When there is no grounding strip but earth near the
equipment room that allows a grounding body to be buried,
hammer an angle iron/steel pipe longer than 0.5 m into the
earth, weld the yellow-green ground wire of the switch onto
the angle iron/steel pipe, and process the joint against
erosion.
