4
Broadcast MAX-ratio: 100%
Unicast MAX-ratio: 100%
Multicast MAX-ratio: 100%
PVID: 1
Mdi type: auto
Port link-type: access
Tagged VLAN ID : none
Untagged VLAN ID : 1
Port priority: 0
Last clearing of counters: Never
Peak value of input: 1205 bytes/sec, at 2000-04-26 12:02:26
Peak value of output: 299 bytes/sec, at 2000-04-26 12:00:51
Last 300 seconds input: 7 packets/sec 659 bytes/sec 0%
Last 300 seconds output: 1 packets/sec 109 bytes/sec 0%
Input (total): 34606 packets, 3026637 bytes
1846 unicasts, 27572 broadcasts, 5188 multicasts, 0 pauses
Input (normal): 34606 packets, 3026637 bytes
1846 unicasts, 27572 broadcasts, 5188 multicasts, 0 pauses
Input: 0 input errors, 0 runts, 0 giants, - throttles
0 CRC, 0 frame, 0 overruns, 0 aborts
- ignored, - parity errors
Output (total): 1388 packets, 157690 bytes
1139 unicasts, 2 broadcasts, 247 multicasts, 0 pauses
Output (normal): 1388 packets, 157690 bytes
1139 unicasts, 2 broadcasts, 247 multicasts, 0 pauses
Output: 0 output errors, - underruns, - buffer failures
0 aborts, 0 deferred, 0 collisions, 0 late collisions
- lost carrier, - no carrier
Table 1
Command output description
Field Description
GigabitEthernet1/0/1 current state
Physical state of the Ethernet interface, which can be one of the
following:
•
DOWN ( Administratively )—The Ethernet interface was shut down
with the
shutdown
command, that is, the interface is
administratively down.
•
DOWN ( Link-Aggregation interface down )—The Ethernet
interface is physically down because the aggregate interface
corresponding to the aggregation group to which the Ethernet
interface belongs was shut down with the
shutdown
command.
•
DOWN—The Ethernet interface is administratively up but
physically down (possibly because no physical link is present or the
link has failed).
•
UP—The Ethernet interface is both administratively and physically
up..
IP Packet Frame Type
Ethernet framing format on the interface
Description
Description of the interface
Loopback Loopback
testing
status of the interface