157
Field Description
Registrar state machine
The Registrar state machine records the registration of
attributes declared by other participants. Its state can
be INN, LV, L3, L2, L1, MT, INR, LVR, L3R, L2R, L1R,
MTR, INF, LVF, L3F, L2F, L1F, and MTF. Each state
consists of two or three letters or numbers with the
following meanings:
•
The first two letters or numbers indicate the state: IN
stands for In; LV, L3, L2, and L1 all stand for Leaving,
and L3, L2, L1 are three sub-states of LV; MT stands
for Empty
•
The third letter indicates the registration mode: N (if
any) for Normal registration, R for Registration fixed,
and F for Registration forbidden.
For example, MTR stands for “Empty, Registration
fixed", indicating the fixed registration mode in Empty
state.
display gvrp statistics
Syntax
display gvrp statistics
[
interface
interface-list
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default level
1: Monitor level
Parameters
interface
interface-list
: Defines one or multiple Ethernet ports. You can provide up to 10 Ethernet port lists,
by each of which you can specify an individual port in the form of
interface-type interface-number
, or a
port range in the form of
interface-type interface-number1
to
interface-type interface-number2
, where
the end-port number specified by
interface-number2
must be greater than the start-port number specified
by
interface-number1
. If no ports are specified, this command displays the GVRP statistics for all trunk
ports.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see the
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the
display gvrp statistics
command to display the GVRP statistics of the specified or all trunk ports.
Examples
# Display GVRP statistics for trunk port GigabitEthernet 1/0/1.
<Sysname> display gvrp statistics interface gigabitethernet 1/0/1
