68
Use the
undo port link-aggregation group
command to remove the current Ethernet interface from the
aggregation group to which it belongs.
An Ethernet interface can belong to only one aggregation group.
Examples
# Assign Layer 2 Ethernet interface GigabitEthernet 1/0/1 to Layer 2 aggregation group 1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] port link-aggregation group 1
reset counters interface
Syntax
reset counters interface
[
bridge-aggregation
[
interface-number
] ]
View
User view
Default level
2: System level
Parameters
bridge-aggregation
: Clears statistics for Layer 2 aggregate interfaces.
interface-number
: Specifies an aggregate interface number. If the
interface-number
argument is not
specified, this command clears statistics of all aggregate interfaces of the specified type.
Description
Use the
reset counters interface
command to clear the statistics of the specified aggregate interface or
interfaces.
Before collecting statistics for a Layer 2 aggregate interface within a specific period, clear the existing
statistics of the interface.
If no keywords or argument is specified, the command clears the statistics of all interfaces in the system.
If only the
bridge-aggregation
keyword is specified, the command clears the statistics of all Layer 2
aggregate interfaces.
If the
bridge-aggregation
interface-number
keyword and argument combination is specified, the
command clears the statistics of the specified Layer 2 aggregate interface.
The
bridge-aggregation
keyword becomes available only after you create Layer 2 aggregate interfaces
on the device.
Examples
# Clear the statistics of Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> reset counters interface bridge-aggregation 1
reset lacp statistics
Syntax
reset lacp statistics
[
interface
interface-list
]
