70
Port isolation configuration commands
display port-isolate group
Syntax
display port-isolate group
[
group-number
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default level
1: Monitor level
Parameters
group-number
: Specifies an isolation group number. The value range varies with devices.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see the
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the
display port-isolate group
command to display information about one or all isolation groups.
If an isolation group is specified, this command displays information about the specified isolation group;
if not, the command displays information about all isolation groups.
Examples
# On a single-isolation-group device, display information about the isolation group.
<Sysname> display port-isolate group
Port-isolate group information:
Uplink port support: NO
Group ID: 2
Group members:
GigabitEthernet1/0/1
Group ID: 3
Group members:
GigabitEthernet1/0/2 GigabitEthernet1/0/4
# Display information about isolation group 2.
<Sysname> display port-isolate group 2
Port-isolate group information:
Uplink port support: NO
Group ID: 2
