53
<Sysname> display interface bridge-aggregation brief down
The brief information of interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Interface Link Cause
BAGG1 ADM Administratively
Table 10
Output description
Field Description
Bridge-Aggregation1/Route-Aggr
egation1 current state
The Layer 2 aggregate interface status, which can be:
•
DOWN ( Administratively )—The interface is administratively shut
down with the
shutdown
command.
•
DOWN—The interface is administratively up but physically down
(possibly because no physical link is present or the link is faulty).
•
UP—The Ethernet interface is both administratively and physically up.
1Gbps-speed mode, full-duplex
mode
The interface speed is 1Gbps and duplex mode is full duplex mode.
PVID
The default VLAN ID.
Last clearing of counters
Time when the
reset counters interface
command was last used to clear
the interface statistics.
Never
indicates the
reset counters interface
command has never been
used on the current interface since the device’s startup.
The brief information of interface(s)
under bridge mode
Brief information about Layer 2 interfaces.
Link: ADM - administratively down;
Stby - standby
Link status:
•
ADM—The interface has been administratively shut down. To recover
its physical layer state, perform the
undo shutdown
command.
•
Stby—The interface is operating as a backup interface.
Speed or Duplex: (a)/A - auto; H -
half; F - full
If the speed of an interface is automatically negotiated, its speed attribute
includes the auto negotiation flag, letter
a
in parentheses.
If the duplex mode of an interface is automatically negotiated, its duplex
mode attribute includes the auto negotiation flag, letter
a
in parentheses
or a capital
A
. Letter
H
indicates the half duplex mode, and letter
F
indicates the full duplex mode.
Type: A - access; T - trunk; H -
hybrid
Link type options for Ethernet interfaces.
Interface
The abbreviated interface name.
Link
The physical link state of the interface.
Speed
The interface speed, in bps.
Cause
The cause of a DOWN physical link.
display lacp system-id
Syntax
display lacp system-id
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
