61
GE1/0/2 U 32768 1
GE1/0/3 U 63 1
Table 15
Output description
Field
Description
Loadsharing Type
Load sharing type:
•
Shar for load sharing.
•
NonS for non-load sharing.
Port Status
Port state: Selected or unselected.
Flags
LACP state flags:
•
A—LACP is enabled.
•
B—Indicates the LACP short timeout.
•
C—The sending system detects that the link is aggregatable.
•
D—The sending system detects that the link is synchronized.
•
E—The sending system detects that the incoming frames are collected.
•
F—The sending system detects that the outgoing frames are distributed.
•
G—The sending system receives frames in the default state.
•
H—The sending system receives frames in the expired state.
Aggregation Interface
Name of the aggregate interface.
Aggregation Mode
Mode of the aggregation group: Static for static aggregation, and Dynamic for
dynamic aggregation.
System ID
Local system ID, comprising the system LACP priority and the system MAC
address.
Local
Information about the local end.
Port
Port type and number.
Status
Port state: selected or unselected.
Priority
Port aggregation priority.
Oper-Key Operational
key.
Flag
LACP protocol state flag.
Remote
Information about the remote end.
Actor
Local port type and number.
Partner
Remote port index.
enable snmp trap updown
Syntax
enable snmp trap updown
undo enable snmp trap updown
View
Layer 2 aggregate interface view
