72
[Sysname-GigabitEthernet1/0/1] quit
[Sysname] interface GigabitEthernet 1/0/2
[Sysname-GigabitEthernet1/0/2] port-isolate enable group 2
port-isolate group
Syntax
port-isolate group
group-number
undo port-isolate group
{
group-number
|
all
}
View
System view
Default level
2: System level
Parameters
group-number
: Specifies the number of the isolation group, the value ranges from 1 to 4.
all
: Removes all isolation groups.
Description
Use the
port-isolate group
command to create an isolation group.
Use the
undo port-isolate group
command to remove one or all isolation groups.
Examples
# Create isolation group 2.
<Sysname> system-view
[Sysname] port-isolate group 2
