75
Region name :000fe26a58ed
Revision level :0
Configuration digest :0x41b5018aca57daa8dcfdba2984d99d06
Instance Vlans Mapped
0 1 to 9, 11 to 4094
15 10
Table 17
Output description
Field
Description
Format selector
Format selector of the MST region, which is 0 by default and
cannot be configured.
Region name
MST region name.
Revision level
Revision level of the MST region.
Instance Vlans Mapped
VLAN-to-instance mappings in the MST region.
display stp
Syntax
display stp
[
instance
instance-id
]
[
interface
interface-list
|
slot
slot-number
]
[
brief
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default level
1: Monitor level
Parameters
instance
instance-id
: Displays the status and statistics of a particular MSTI, where
instance-id
ranges from
0 to 15 and 0 represents the common internal spanning tree (CIST).
interface
interface-list
: Displays the MSTP status and statistics on the ports specified by a port list, in the
format of
interface-list
= {
interface-type interface-number
[
to
interface-type interface-number
] }&<1-10>,
where &<1-10> indicates that you can specify up to 10 ports or port ranges.
slot
slot-number
: Displays the MSTP status and statistics on the specified IRF member device.
slot-number
represents the member number of the device in the IRF. If this keyword-argument combination is not
specified, this command displays the MSTP status and statistics on all IRF member devices.
brief
: Displays brief MSTP status and statistics.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see the
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
