28
The S5130S-28S-EI, S5130S-28S-EI-M, S5130S-52S-EI, S5130S-52S-EI-M, S5130S-28S-PWR-EI,
S5130S-28S-HPWR-EI, S5130S-52S-PWR-EI, S5130S-28F-EI, and S5130S-52F-EI switches can
provide 10-GE IRF connections through SFP+ ports.
The other S5130S-EI switches can provide GE IRF connections through 10/100/1000BASE-T
autosensing Ethernet ports and GE SFP ports.
You can bind multiple 10/100/1000BASE-T autosensing Ethernet ports or GE SFP ports to an IRF
port for increased bandwidth and availability.
NOTE:
The following figures use the SFP+ ports on the S5130S-28P-HPWR-EI switch as an example. For
the ports that can be used for IRF connections, see
.
Figure 35 IRF fabric in daisy chain topology
Figure 36 IRF fabric in ring topology
Identifying IRF physical ports on the member switches
Identify the IRF physical ports on the member switches according to your topology and connection
scheme.
shows the physical ports that can be used for IRF connection and the port use restrictions.
1
2
3
IRF-port1
IRF-port2
IRF-port1
IRF-port2
1
2
3
